Roof rejuvenation is a restorative treatment that replenishes the shingle’s lost oils and plasticizers, reversing the embrittlement and brittleness caused by UV exposure, oxidation, and weathering. By diffusing rejuvenating oils into the asphalt binder, it restores flexibility, replenishes lost maltenes, and extends the usable life of asphalt shingles—often by 5–10 years or more.

Inspection & Cleaning: Roof is inspected for damage and cleaned of debris, moss, or algae.

Application: A specialized rejuvenating oil formula is sprayed or brushed uniformly across the shingle surface.

Diffusion: Over the next few days, heat and time allow the oils to penetrate the asphalt binder, restoring its rheological properties.

Curing & Protection: The roof surface once again has its original flexibility and water-shedding capability, protecting against cracking, granule loss, and UV degradation.

Cost Savings: Typically less than half the cost of a full re-roof.

Extended Service Life: Adds 5–10+ years of protection.

Enhanced Weather Resistance: Reduced granule loss and improved UV protection.

Eco-Friendly: Diverts asphalt from landfills and reduces raw-material demand.

Quick Turnaround: Most applications can be completed in a single day with minimal disruption.

Age Window: Ideal for roofs aged 3–7 years, before extensive granule loss or cracking appears.

Visible Signs: Fading color, brittle shingles, granules in gutters, or surface chalking.

Preventive Maintenance: Even if no obvious damage exists, early treatment maximizes the life-extension potential.

A properly applied rejuvenation treatment typically delivers effective performance for 5–10 years, depending on roof pitch, climate, and exposure. Periodic re-treatments can further extend roof life.

Roof rejuvenation is formulated for most 3-tab and architectural asphalt shingles. It is not recommended for specialty shingles (e.g., cedar shake, slate) or roofs with significant existing damage (e.g., widespread cracking or missing granules).

Costs vary by roof size, pitch, and local labor rates. As a rule of thumb, roof rejuvenation runs at about 18-30% of a full reroof cost. A detailed on-site estimate is the best way to determine your project’s investment. Get an Instant Quote Now!

Many manufacturers allow rejuvenation treatments without voiding their standard shingle warranties—provided the shingles are still within their original warranty period and the treatment is performed by a licensed contractor using approved products. Always check your specific shingle warranty terms.

Yes. By extending the service life of existing shingles, rejuvenation reduces tear-off waste, lowers landfill burden, and decreases the demand for virgin asphalt and mineral resources.

We clean siding, roofs, concrete, decks, fences, gutters, and more. We adjust our equipment and techniques based on each surface to ensure safe, effective results.

No. We use soft washing for delicate areas like roofs and siding, and high-pressure washing for tougher surfaces like driveways.

Soft washing is a low-pressure, chemical-assisted cleaning method used to safely remove dirt, mold, mildew, algae, and other organic stains from exterior surfaces. Rather than blasting surfaces with high-pressure water (as in power washing), soft washing relies on a combination of gently applied water (typically under 150 psi) and specially formulated cleaning solutions to achieve a deep clean without damaging delicate materials.

Key Components of Soft Washing

Low Pressure: Equipment is set to spray at a much lower pressure than traditional power washers, minimizing the risk of etching, etching, or stripping paint.

Cleaning Agents: A blend of surfactants, algaecides/fungicides, and detergents. Common ingredients include sodium hypochlorite (bleach), sodium hydroxide (lye), and various eco-friendly surfactants. These kill organic growth at the root and prevent rapid regrowth.

Dwell Time: After application, the solution is allowed to sit (“dwell”) on the surface for several minutes. This ensures full penetration of the cleaning agents into pores and crevices before rinsing.

Typical Applications

Roof Shingles (as with NuTopp Rejuvenator preparation)

Vinyl, Aluminum, or Wood Siding

Fences and Decks (wood, composite)

Stucco, EIFS, and Masonry

Gutters and Fascia

Solar Panels

Water Pressure

Soft Washing: Low pressure (typically < 150 psi) gently applies cleaning solutions without damaging surfaces.

Pressure Washing: High pressure (500–4,000 psi) relies on force of water to strip dirt and stains.

Cleaning Method

Soft Washing: Chemical-driven—uses a blend of surfactants, algaecides/fungicides, and detergents (e.g., sodium hypochlorite, sodium hydroxide) to kill organisms at the root.

Pressure Washing: Mechanical-driven—relies purely on the hydraulic force of water to blast away contaminants.

Dwell Time

Soft Washing: Allows cleaning agents to sit (“dwell”) on the surface for 10–15 minutes (or per manufacturer guidelines), ensuring deep penetration before rinsing.

Pressure Washing: Immediate rinse—no dwell time; debris is removed on contact.

Surface Impact

Soft Washing: Gentle on delicate materials (asphalt shingles, wood, siding, stucco), preventing etching, splintering, or water intrusion.

Pressure Washing: Risk of surface damage—high-pressure jets can etch concrete, strip paint, and force water behind siding.

Lasting Effect

Soft Washing: Longer-lasting clean, as it kills microscopic roots of mold, mildew, and algae; inhibits rapid regrowth.

Pressure Washing: Shorter-lived results, since it removes only surface-level growth without addressing the organism’s root structure.

Typical Applications

Soft Washing: Roof shingles, vinyl/wood siding, fences/decks, stucco/EIFS, masonry, gutters, solar panels.

Pressure Washing: Driveways, sidewalks, heavy industrial equipment, brick walls—surfaces that can withstand high-pressure water.

Environmental & Safety Considerations

Soft Washing: Uses biodegradable surfactants and controlled bleach solutions; pre-rinsing plants and containment minimize runoff impact. PPE (gloves, goggles, respirator) is required.

Pressure Washing: Generally water-only; can dislodge paint or harmful materials into runoff. PPE (goggles, boots) is still recommended due to flying debris.

Surface Assessment: Identify material type, level of soiling, and any sensitive areas.

Pre-treatment Masking: Protect plants, windows, and other non-target areas.

Chemical Mixing: Prepare solution with correct ratio of bleach, surfactant, and water (often 1:4 to 1:10 bleach to water, depending on severity).

Application: Spray solution uniformly at low pressure, ensuring full coverage.

Dwell Time: Allow 10–15 minutes (or per manufacturer’s guidelines) for the solution to work.

Rinse: Use low-pressure rinse to wash away loosened debris and residual chemicals.

Post-inspection: Check for missed spots and reapply if necessary; remove masking.

Safety & Best Practices

Personal Protective Equipment (PPE): Gloves, goggles, respirator if needed.

Chemical Handling: Mix outdoors or in ventilated areas; follow manufacturer’s guidelines.

Environmental Care: Pre-rinse landscaping with fresh water; avoid runoff concentration.

Surface Testing: Trial on a small inconspicuous area to confirm compatibility.

Most residential jobs are completed in a few hours. A Full roof rejuvenation may need to be completed in stages due to weather, or the needs for a cleaning treatments. Larger or commercial projects may take a full day — we’ll give you a clear timeline upfront.

Yes, when done correctly. We’re trained to use the right pressure and eco-friendly solutions to avoid damage and get the best clean.

Not necessarily. As long as we have access to the areas being cleaned and a water source, we can complete the job while you’re away.